1
W 170 TROLLEY​

The all-rounder: a sturdy box trolley for universal applications, for in-company logistics or for the transportation of waste.

 

  • Sturdy, generously dimensioned edge and base profile sections, high-strength positive locking ensures permanent bonding to jacket and base metal.
  • End and side walls reinforced with peripheral beading and corner beads.
  • Running gear: 2 swivel and 2 fixed castors, corner-mounted, Ø 125 mm, 40 mm wide, easy running, rubber wheels, “non-marking”, roller bearings, thread guards.
  • Casing joint riveted throughout. Frame profile sections welded.

 

 

 

 

 

 

 

 

 

 

10
W 171 transport trolley with 3-part lid

Versatile transport trolley with lid for protection of the content, peripheral protection and anodised, abrasion-resistant surface.

  • 3-part lid folding mechanism and a front-panel flap.
  • Anodised design.
  • Side cutout with profile-section surround; profile-section joints continuously welded.
  • Sturdy, generously dimensioned edge and base profile sections, high-strength positive locking ensures permanent bonding to jacket and base metal.
  • Smooth walls without beads.
  • Longitudinal seam welded, base joint sealed all round.
  • Trolley base with drainage channel and drain valve.
  • Sliding handle on swivel-castor end.
  • Plastic-padded fender frame all round.
  • Running gear: 2 swivel and 2 fixed castors, corner-mounted, Ø 200 mm, 50 mm wide, easy running, rubber wheels, “non-marking”, roller bearings, thread guards.
5
W 171 transport trolley with fold-down section

Sturdy transport solution with large flap for easy and ergonomic access to the contents of the trolley.

 

  • Sturdy, generously dimensioned edge and base profile sections, high-strength positive locking ensures permanent bonding to jacket and base metal.
  • End and side walls reinforced with peripheral beading and corner beads.
  • One long side with fold-down section folding half-way, for more convenient loading and unloading.
  • Side cutout with profile-section surround; profile-section joints continuously welded.
  • Flap with bolt retainer and moving holding hinges.
  • Chassis: 2 swivel and 2 fixed castors, corner-mounted, 125 mm Ø., easy running, rubber wheels, “non-marking,” roller bearings, thread guards.

 

 

 

 

6
W 172 trolley

Sturdy aluminium trolley for versatile use.

  • Sturdy, generously dimensioned edge and base profile sections, high-strength positive locking ensures permanent bonding to jacket and base metal.
  • End and side walls reinforced with peripheral beading and corner beads.
  • One long side with cutout section, approx. 1.230 x 295 mm.
  • Side cutout with profile-section surround; profile-section joints continuously welded.
  • One sliding handle at either end.
  • Chassis: 2 swivel and 2 fixed castors - corner-mounted, Ø 200 mm, 40 mm wide, easy-running, rubber wheels, "non-marking", roller bearings, thread guards.
8
Transport trolleys W181

Aluminium box trolley for transporting sensitive, lightweight materials.

 

  • Sturdy edge and base profile.
  • Smooth inside walls.
  • Side-panel connection straight-bead-riveted.
  • Running gear: 2 swivel and 2 fixed castors, corner-mounted, Ø 75 mm, 25 mm wide, easy running, rubber wheels, “non-marking”, roller bearings, thread guards.

 

 

 

 

 

 

 

9
W 182 trolley

Sturdy aluminium trolley for versatile use.

 

  • Sturdy edge and base profile.
  • End and side walls reinforced with peripheral beading and corner beads.
  • Stackable.
  • Running gear: 2 swivel and 2 fixed castors, ∅ 125 mm, 40 mm wide, easy running, rubber wheels, “non-marking”, roller bearings, thread guards.

 

Hints & Special Features

  • Order No. 40661: anodised, with 16 drain holes in centre of floor.Order No. 40780: non-anodised, without drain holes.

 

 

13
Mobile transport and collection container

Mobile transport and collection container.

 

  • Sturdy edge and base profile.
  • End and side walls reinforced with peripheral beading and corner beads.
  • Profile-reinforced, hinged lid with slot approx. 420 x 24 mm with sheet metal security flap.
  • One galvanised-steel snap fastener.
  • One sliding handle on the wheel side.
  • Running gear: Axle tube with 2 rubber wheels, Ø 200 mm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7
W 161 Spring Loaded Trolleys

No more bending: easy access to the contents of the trolley for ergonomic working, for example in libraries, laundries or in the catering trade.

  • Sturdy, generously dimensioned edge and base profile sections, high-strength positive locking ensures permanent bonding to jacket and base metal.
  • Anodised, edge profile reinforced with abrasion-resistant plastic padding.
  • Trolley with vertically moveable base which keeps the load at constant height for easy access.
  • Depending on the type of trolley, the load capability can be varied from 30 to 195 kg in increments of 15 kg by means of replaceable lifting elements.
  • The moveable base does not tilt, even when loaded on only one side.
  • Running gear: 2 swivel and 2 fixed castors, ∅ 125 mm, 40 mm wide, easy running, rubber wheels, “non-marking”, roller bearings, thread guards.
  • Castors arranged centrally for easy manoeuvring, even in the most confined spaces.
  • Corner-mounted running gear available on request.
11
Shelf trolley

Flexible platform trolley for collection and transportation of goods with ready access from all sides.

 

  • With two sliding handles and integrated edge reinforcement.
  • Plastic deflector castors.
  • Running gear: 4 corner-mounted swivel castors, Ø 125 mm, 40 mm wide, easy running, rubber wheels, “non-marking”, roller bearings, thread guards.
  • Accessories: Wheel brake for swivel castors with Ø 125 mm.
  • Load capacity per shelf: 40 kg.
  • Order No. 40726 with 2 shelves (distance between the shelves 488 mm).
  • Order No. 40727 with 3 shelves (distance between the shelves 230 mm).

 

 

 

 

 

 

 

 

 

 

 

 

 

4
Lid, suitable for 40674 and 40635
2
Lid, suitable for 40631
3
Lid, suitable for 40633
12
Variomobil

Safe transportation of small items and easy access through attachable end and side panels.

 

  • Sturdy, smooth platform.
  • Running gear: 2 swivel and 2 fixed castors in stainless steel, corner-mounted, Ø 160 mm, 50 mm wide, easy-running, rubber wheels, "non-marking", roller bearings.
  • Swivel castors with wheel brakes.
  • Supplementary parts to basic model: Smooth, removable ends and side panels (easy subsequent assembly).
  • Push-pull bar, plastic-sheathed, for ZARGES Variomobil, Order No. 40787.
  • Aluminium side wall, one-part. Order No. 40788.

 

 

 

 

 

14
Universal cupboard trolley W 105 N
  • Aluminium cupboard trolley, anodised, for a wide range of applications.
  • Smooth interior; no undercuts / no inaccessible areas in washdown facility (inside dimensions correspond to clearance dimension).
  • Supplied as standard with fixed additional shelf (excluding 41861 and 41862).
  • Optionally with individual interior fittings.
  • Ergonomically shaped handle of anodised aluminium section on the swivel-castor side.
  • Chassis: 2 swivel and 2 fixed castors, corner-mounted, 200 mm Ø., easy running, rubber wheels, "non-marking," with thread guards.
  • Also suitable for container washdown facilities if appropriate special running-gear castors are used.